SPT-1000 Water Well Drill Rig

SPT-1000 water well rigs are used for farmland irrigation, drinking water and industrial water supply. Its main parts are installed on the "YAN SHAN" Trailer chassis. The machine can be equipped with both diesel engine and motor. SPT-1000 water well drilling machinery adopts direct cycle drilling mode to realize air DTH hammer drilling. By the usage of pressure device and hydraulic control, the drilling efficiency of the drilling equipment is greatly improved.

Parameter

SPT-1000 Water Well Rigs

The shape size:
14180×2500×4100(MM)

The whole machine weight
29T
Drilling aperture:500MM The drilling depth:1000M
Kelly:108×108×10450MM Hole drill pipe :φ89
Drill chassis parts ① Chassis: YanShan

The mast section ① Type: Truss type
② Load: 60T
③ Height:16M
Diesel power part Diesel engine model: BF8L513C
Power/Speed 213kW/2300r/min
Mud Pump Model BW1500 mud pump
maximum pressure 12 MPa
maximum pump discharge 1500 L/min
The guide pull down mechanism The maximum pull down 440000N
Pull down stroke 10.6M
Pull down doe rope diameter Φ9.3 MM
Rotary table gear box Output speed (r/min) Ⅰ Ⅱ Ⅲ IV V reversal
27 49 80 131 208 35

Main hoist
hoisting tool
① Single rope tension 68600N
② winch rope capacity (m): 130/Φ26
rotary table Rotary table through hole diameter (mm) Φ505
Remarks:Speed parameters see Rotary table gear box
The rig can be installed 30KW generator After the installation of generator, can be used as electric welding, lighting, and other useful life.

Download

Download