450mtrailer mounted
hydraulic water well drill rig is suitable for hydrology and geology
LANTYPC®, water well drilling, etc. The machine is mainly mechanically
driven and partly hydraulically controlled. It is featured with convenient
movement and highly mechanical operation. The machine can be equipped with both
diesel engine and motor.450mTrailer mounted hydraulic water well drill rig adopts positive cycle drilling
mode to realize air DTH hammer drilling. It is suitable for operating in clay
layer, sand layer, gravel layer, bed rock layer, etc
Parameter
Drilling Rig
The shape size:
11300×2500×4100(MM)
|
The whole machine
weight
14.5T
|
|
|
Drilling aperture:500MM
|
The drilling depth:450M
|
|
|
Kelly:108×108×7500MM
|
Hole drill pipe :φ89
|
|
|
Drill chassis parts
|
① Chassis: YanShan
② Wheelbase 9310MM+1310MM
|
|
|
|
|
The mast section
|
① MODEL: Truss type
② Load :35T
③ Height:11M
|
|
|
power part
|
Electric motor
model:STC-30
|
|
|
Power 30KW
|
|
Mud Pump
|
Model BW900/25 mud
pump
maximum pressure 2.5
MPa
maximum pump discharge 900L/min
required power 37 Horsepower
suction pipe diameter Φ101.6 MM
diameter of the drain pipe Φ76.2MM
|
|
|
Rotary table gear box
|
Output speed (r/min)
Ⅰ Ⅱ Ⅲ IV
V reversal
33 59 97
159 253 27
|
|
Mainhoist
Include
Bailing , tool winch
|
① Single rope tension 40000N
② Drum diameter: φ280MM
③ wirerope diameter Φ17.5MM
④ rope capacity 80M
⑤ Rope speed 1.469m/s、3.819m/s
|
|
|
Bailing
|
① Single rope tension 40000N
② Drum diameter: φ280MM
③ wirerope diameter Φ17.5MM
④ rope capacity 80M
⑤ Rope speed 1.469m/s、3.819m/s
|
|
control panel
|
All hydraulic
operation, the source of power for hydraulic pump,convenient
and efficient
|
|
|
rotary table
|
Rotary table through
hole diameter (mm) Φ505
Remarks:Speed parameters see Rotary table gear box
|
|
|
The rig can be
installed 30KW generator
|
After the
installation of generator, can be used as electric welding, lighting, and
other useful life.
|
|